Need some Advice on a Concorde build
Moderators: Randy Perry, The Flying Dutchman, Stiltzkin, skezza, Trigger
Need some Advice on a Concorde build
Need some advice on a concorde build.
I've tried contacting a number of people regarding the hardware I'll need to make my concorde tribute, but have hit some dead ends. So, hopefully there are some of you that can help me with my last few questions. I already have plans, just need parts and perhaps a bit of guidance.
I have found the brass bridge, and even have some tuners that are close. I've done my research and know which pickups I want, etc.
I really want THE exact Gotoh tuners though. Can't seem to find them with the drop leg screw tab like the original. Anybody have an idea where I can look?
Lastly, paint choice. If anybody can help me find the right shade of black/blue for the stripes and headstock, I'd be grateful.
I understand there are some who won't disclose because it's like a secret recipe, so to speak. But I just want the best replica possible. I'm not building more than just this one. I just want it done right
I've tried contacting a number of people regarding the hardware I'll need to make my concorde tribute, but have hit some dead ends. So, hopefully there are some of you that can help me with my last few questions. I already have plans, just need parts and perhaps a bit of guidance.
I have found the brass bridge, and even have some tuners that are close. I've done my research and know which pickups I want, etc.
I really want THE exact Gotoh tuners though. Can't seem to find them with the drop leg screw tab like the original. Anybody have an idea where I can look?
Lastly, paint choice. If anybody can help me find the right shade of black/blue for the stripes and headstock, I'd be grateful.
I understand there are some who won't disclose because it's like a secret recipe, so to speak. But I just want the best replica possible. I'm not building more than just this one. I just want it done right
Re: Need some Advice on a Concorde build
the paint is called 1 shot blue.......and I got that from grover himself so it IS what was used
not sure which one though because they make a few
http://www.tcpglobal.com/kustomshop/ksoneshot.aspx
not sure which one though because they make a few
http://www.tcpglobal.com/kustomshop/ksoneshot.aspx
Re: Need some Advice on a Concorde build
Thank you very much. Is there a specific white? Is it poly or nitro? I wanna say nitro would have aged, but Randy's still looks white
Re: Need some Advice on a Concorde build
yes it seems to still be very white so it may be enamel (pretty sure the one shot is enamel)...if you go one shot then get the white in the same brand and you should be finecamdenlp wrote:Thank you very much. Is there a specific white? Is it poly or nitro? I wanna say nitro would have aged, but Randy's still looks white
Re: Need some Advice on a Concorde build
Cool, thanks
Re: Need some Advice on a Concorde build
I should add you might want to be a bit careful with what white you go with because I did a tribute one years ago and went a "normal" white and to be honest it was to white....next white I got was slightly off white and looked a lot better
- randy will never die
- Mass Poster
- Posts: 1033
- Joined: Thu Jan 12, 2012 5:11 am
- Location: clinton,Iowa USA
Re: Need some Advice on a Concorde build
need a little more help on the head stock color you said 1 shot blue could you click on the blue you mean and copy and past the addres bar link please thank yousytharnia wrote:the paint is called 1 shot blue.......and I got that from grover himself so it IS what was used
not sure which one though because they make a few
http://www.tcpglobal.com/kustomshop/ksoneshot.aspx
- randy will never die
- Mass Poster
- Posts: 1033
- Joined: Thu Jan 12, 2012 5:11 am
- Location: clinton,Iowa USA
Re: Need some Advice on a Concorde build
the 1 shot blue has to look black when you are looking at it but at an angle it has to look blue/puprle
thats what randys looked like but it was not just used for the head stock it was also used for the pinstripes too
mike shanon said so it an interview
thats what randys looked like but it was not just used for the head stock it was also used for the pinstripes too
mike shanon said so it an interview
Re: Need some Advice on a Concorde build
Thanks synth.. I'll keep that in mind
Re: Need some Advice on a Concorde build
Well, I haven't gotten the paint yet, but there is some progress to note.
Here is the lovely Maple board that was chosen. Decided against Big Leaf on the wings because I wanted more weight.
Here is the lovely Maple board that was chosen. Decided against Big Leaf on the wings because I wanted more weight.
Re: Need some Advice on a Concorde build
With the fantastic help of a great man I have all the dimensions I need. I'm happy with the layout...
Btw this axe will be joining two associates who deserve this photo opportunity
Btw this axe will be joining two associates who deserve this photo opportunity
Re: Need some Advice on a Concorde build
Here is the fretboard. Almost completed... I guess the binding over frets is a tedious job...but worth it!
Re: Need some Advice on a Concorde build
And cut to the most recent progress. Sorry about the gab inbetween, haha. Looks like cavity routing this week, then time for paint!
Re: Need some Advice on a Concorde build
I can't wait, btw
- randy will never die
- Mass Poster
- Posts: 1033
- Joined: Thu Jan 12, 2012 5:11 am
- Location: clinton,Iowa USA
Re: Need some Advice on a Concorde build
Looks good. Can't wait to see it done. Just remember use the NOS brass bridge it's the exact bridge randy used