question about altecs & randys marshall cabinet?
Moderators: Randy Perry, The Flying Dutchman, Stiltzkin, skezza, Trigger
-
- Senior Member
- Posts: 74
- Joined: Tue Dec 21, 2010 4:46 am
question about altecs & randys marshall cabinet?
Did the altecs fit inside a regular marshall 1960 cabinet, or did the cabinet need to be modified to accomodate the larger magnet size of those altecs?
Re: question about altecs & randys marshall cabinet?
I don't see any reason why they wouldn't fit into the cab....with every marshall I have owned there is plenty of room behind the speakers for large magnets
- The Flying Dutchman
- Moderator
- Posts: 3681
- Joined: Sun Mar 12, 2006 4:03 pm
- Location: Gotham City
Re: question about altecs & randys marshall cabinet?
They fit easily in a 1960 Marshall cabinet, no problem!thepolkadots wrote:Did the altecs fit inside a regular marshall 1960 cabinet, or did the cabinet need to be modified to accomodate the larger magnet size of those altecs?
(better use a bit longer screws because the altecs have a thicker frame than celestions, sometimes the screws are not long enough)
The winner of the rat race is still a rat.
-
- Cool Member
- Posts: 160
- Joined: Thu Jan 20, 2011 5:18 pm
- Location: USA
Re: question about altecs & randys marshall cabinet?
ditto on the longer screwsbut,yes,they do fit w/ no problem.
in fact altec is back in business so to speak.
great plains audio bought the original altec machines & is reproducing the speakers again.
they are a bit spendy though.
here's their link.
http://www.altecpro.com/products/vintage/index.htm
in fact altec is back in business so to speak.
great plains audio bought the original altec machines & is reproducing the speakers again.
they are a bit spendy though.
here's their link.
http://www.altecpro.com/products/vintage/index.htm
- TheMrAxeman
- Mass Poster
- Posts: 534
- Joined: Tue Oct 13, 2009 1:49 am
- Location: Dallas, TX
- Contact:
Re: question about altecs & randys marshall cabinet?
the link says they are discontinued productsblues_n_cues wrote:ditto on the longer screwsbut,yes,they do fit w/ no problem.
in fact altec is back in business so to speak.
great plains audio bought the original altec machines & is reproducing the speakers again.
they are a bit spendy though.
here's their link.
http://www.altecpro.com/products/vintage/index.htm
Wanna trade boots? email randyrhoadsboots@gmail.com
-
- Cool Member
- Posts: 160
- Joined: Thu Jan 20, 2011 5:18 pm
- Location: USA
Re: question about altecs & randys marshall cabinet?
that could be correct. it's been a few months since i talked to them & it was a special order then.TheMrAxeman wrote:the link says they are discontinued productsblues_n_cues wrote:ditto on the longer screwsbut,yes,they do fit w/ no problem.
in fact altec is back in business so to speak.
great plains audio bought the original altec machines & is reproducing the speakers again.
they are a bit spendy though.
here's their link.
http://www.altecpro.com/products/vintage/index.htm