Soundclip of RRT1 pedal

ptate · Post by **ptate** » Sat Feb 07, 2009 12:21 pm

Well, here is the clear tone of my distortion pedal (full tilt!). No amp, just guitar into pedal then PC. 'Scuse the playing.

LINK DISABLED (SEE BELOW)

Dino · Post by **Dino** » Sat Feb 07, 2009 4:19 pm

I didn't see any clips posted on the website and it looks like you need to be a "member" in order to access the link you posted above.

I'm really curious to hear how it sounds.

ptate · Post by **ptate** » Sat Feb 07, 2009 7:35 pm

Hey Dino.

Cheers. Try here (it works for me- just open the file).

LINK DISABLED (SEE BELOW)

If not, I'll ask my mate to upload it onto the pedal site then put a direct link in tomorrow.

Fingers crossed.....!!

Zakk Daniels · Post by **Zakk Daniels** » Sat Feb 07, 2009 10:26 pm

that pedal sounds good!!!!

ptate · Post by **ptate** » Sat Feb 07, 2009 10:54 pm

Cheers Zakk.

The clip is only my Les Paul Custom into the pedal, then into the PC, using a very simple and basic recording package- no other pre, or power amp on it. I wanted a smooth sounding distortion that none of the others seemed to provide and this unit hits the mark for me.

The tone, mixed with a Marshall valve amp, is fantastic. It gives me (what I think) is the Rhoads Blizzard/Madman tone.

ptate · Post by **ptate** » Tue Feb 09, 2010 6:51 am

Hi everyone,

Finally got round to posting a demo vid on YouTube with the RRT-1 standard (Germanium only) through three different tube amps (excuse the numb sounding northern accent...!!):

Harley Benton GA5H (modded)
Marshall Haze 15
Marshall JCM800 2204 (1982) head.

Clip isn't about the playing, but the sound of the pedal when used in conjunction with the amp. Only put the pedal dimed for the (so I'm told) Randy tone.....You decide

.

http://www.youtube.com/watch?v=3-L2-tuSW1g

Cheers